I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.

table saw stand Amazon.com


The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

dewalt dwe7491rs vs bosch 4100-10 Amzon.com


Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.

dewalt dwe7491 Amzon.com


The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.

table saw table Amazon.com


Now I am supposed to box it up (an enormously difficult task in itself because how tightly it is packed), somehow pick up a 110lb 4′ x 3′ x 3′ box (with weak cardboard that tears if you use the included handles) on my own to put it into my vehicle, drive to the nearest store (an hour round trip), somehow get a 110lb 4′ x 3′ x 3′ box out of the vehicle, lug it into the store, wait in line to return it, then presumably wait while another one is shipped to me (the local store has none of these in stock).
The DWE7490X is a great table saw that guarantees convenience and flexibility thanks to its scissor stand. It has been exceptionally designed with a stand that makes the job easier when setting it up. Also, it combines portability and power into one very convenient table saw. Unfortunately, some will find the 87 pounds a bit of a stretch in terms of carrying it around.
Accessory Storage – DEWALT clearly made an effort to make it easy and convenient to store the accessories including the blade guard. One of my pet peeves on the job site is asking the crew where they put the guard. Typically it gets removed for some cross cutting or dado’s and then never makes it back on the saw. Having a dedicated storage location for the guard makes that much less likely to happen. There’s a place to store the wrench, guard, riving knife, miter gauge, and the anti-kickback knives.
None of your woodworking projects will go wrong if you have the best table saw for your individual needs. Hopefully, with the above table saw reviews, you now have enough info to find your right fit. Although a comparison between the DWE7480 vs DW745 shows almost the same great features, our top pick is the DW745. Although it is small for some people, it is durable, has good speeds, is powerful, and most importantly, it is budget-friendly. 

hercules table saw review Amazon.com


I have read dozens of reviews for Dewalt,Bosch,Baileigh,Grizzly and others and from my perspective (regarding Dewalt at least), Black&dDecker/Stanley have turned the product line , for the most part into junk. I have read reviews that indicate outright, that the table is not level, the fence is warped and if you want accurate cuts, then possibly you should look elsewhere.
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.

table saw sled Amazon.com


Chris – Great question. If you break it down a bit you can see why. The table saw uses a much smaller blade so the demand on that saw is actually quite a bit less. Also, if you make the table saw 120, you need another battery, and the conversion cable….the saw becomes VERY expensive. Just my two cents…but I’m fairly sure this is what kept it at 60v….it’s damn impressive though.
I have read dozens of reviews for Dewalt,Bosch,Baileigh,Grizzly and others and from my perspective (regarding Dewalt at least), Black&dDecker/Stanley have turned the product line , for the most part into junk. I have read reviews that indicate outright, that the table is not level, the fence is warped and if you want accurate cuts, then possibly you should look elsewhere.

dewalt dwe7491 nz Amzon.com


Thanks for the response. I went to Lowes and checked several fences on Dewalts and they are all bowed about the same. But I measured the bow using feeler gages and it’s only about .008 inch, so not really a big deal. Interestingly, the Bosch jobsite saw was perfect for that particular feature. Like you said, stock will hit at the bottom of the fence and for very fine work, I’d probably be using the fence extension which is flat. I just made a picture frame today which requires accurate cuts and along with my Incra miter gage, the saw did a beautiful job. I do love how easy the fence is to move and adjust. I used my dado stack which worked fine. I also made a zero clearance throat plate. What a great tool, all in all.


I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

dewalt dwe7491 motor Amzon.com


I have read dozens of reviews for Dewalt,Bosch,Baileigh,Grizzly and others and from my perspective (regarding Dewalt at least), Black&dDecker/Stanley have turned the product line , for the most part into junk. I have read reviews that indicate outright, that the table is not level, the fence is warped and if you want accurate cuts, then possibly you should look elsewhere. 

dewalt dwe7491 nz Amzon.com


What is a fence? How important is it in a table saw? It gives you an option for horizontal or vertical adjustments. A good rip fence should be aligned to the blade at all times. Without a fence, everything will be disgusting. Ensure that it is heavy and that it can glide smoothly across the rails. Also, make sure that the locking mechanism is perfect and convenient.
A table saw is among the most dangerous power tools in your workshop. If not operated correctly, table saws can cause lots of harm. Different types come with varied safety measures and features like flesh sensors, auto-reset switches, anti-kickback pawls, among others. Finding one with all these features comes at a price, but what is cost compared to your safety?

zero clearance insert for dewalt dwe7491 Amzon.com


The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.


A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on our job site and in our shop and were impressed with its portability, versatility, performance and power.

miter saw Amazon.com


A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on our job site and in our shop and were impressed with its portability, versatility, performance and power.

dewalt dwe7491 accessories Amzon.com


This particular Dewalt table saw is our choice for commercial use. It features a 15-amp motor, which has an amazing speed of 4800 rpm. So, if you’re looking for a saw that incorporates high torque and power, this is one you shouldn’t pass up. The high number of spins in a minute can rip through several types of woods, which is why this model is ideal for different types of applications.

dewalt dwe7491 blade change Amzon.com


Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.

cabinet saw Amazon.com


Meanwhile, the most updated Ridgid table saw boasts of a heavy duty portable body with stand. This has a 15-amp motor with 4000 rpm. This is an updated table saw that provides a single-point release for simple assembly and disassembly. This Ridgid table saw offers an onboard storage system for your miter gauge, blades, rip fence and other important accessories. This is a handy, compact and portable power table saw you just might need in your workshop or worksite.

chicago electric table saw Amazon.com

×