The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.
Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.
The first ever brass-geared worm drive table saw was first developed by Skilsaw to meet the growing needs of woodworkers on the go. Call this a sophisticated portable table saw, the Skilsaw Worm Drive Table Saw is the first ever saw that can be set up anywhere and once you are done, it can be folded and packed away. This foldable and compact table saw has made it possible to cut materials faster even in remote construction sites.

dewalt dwe7491 zaagblad Amzon.com


Without worrying much about the budget, the DEWALT DW745 is perhaps the best hybrid table saw you can get. It comes with a powerful motor, it is highly affordable, and it is a high-end tool that can double up as a job site table as well. At only 45 pounds, it is lightweight and can be moved from one location to another. This is why it is our top choice for homeowners.
Todd Fratzel is the Editor of Tool Box Buzz and the President of Front Steps Media, LLC, a web based media company focused on the Home Improvement and Construction Industry.He is also the Principal Engineer for United Construction Corp., located in Newport, NH. In his capacity at United he oversees the Residential and Commercial Building Division along with all Design-Build projects.He is also the editor of Home Construction & Improvement.

shop series table saw Amazon.com


The first ever brass-geared worm drive table saw was first developed by Skilsaw to meet the growing needs of woodworkers on the go. Call this a sophisticated portable table saw, the Skilsaw Worm Drive Table Saw is the first ever saw that can be set up anywhere and once you are done, it can be folded and packed away. This foldable and compact table saw has made it possible to cut materials faster even in remote construction sites.

dewalt dwe7491 zaagblad Amzon.com


I have always wanted a worm drive table saw for myself considering that I work constantly on the road. But as I checked the best type of portable table saw, I found not just the Skilsaw worm drive table but also a worm drive table saw from DeWalt. These two table saws are the best of their category. These have updated and top of the line features. If you are like me, shopping for the ideal portable table saw, then you will surely find the one you need from these top picks. 
About the setbacks, only a few users have cited that the dado blade is hardly accommodated perfectly and that it features a flat-track gauge instead of a T-track, which might not keep the miter gauge appropriately in place. Other than that, this table saw is popular and it enjoys good reviews. So, if you value efficiency and meticulous works, this is the saw you should get.
Product reviews on this site contain our opinion of a product or service. We will always strive for objectivity and transparency in our reviews. Our goal is to provide readers with honest, objective information based on our own experiences. We never have and never will accept payment in exchange for a positive review. Many of the products that we review are provided to us for free by a manufacturer or retailer. In some cases, we also have advertising or affiliate relationships with manufacturers and retailers of products and services we review. For additional information please visit our additional disclosure policies.
The DeWalt is a 7 ¼” worm drive circular saw that is lightweight at only 14 pounds. It is light so it’s good for daily use outdoors or in the field. It is made from magnesium that gives you a strong but light saw. This has an extra-wide saw hook that accepts material up to 2- ½ inches wide. This DeWalt circular saw has a tough cord protection system to give you 4 times improved cord jerk protection. Along with its 53-degree bevel capacity which detents at 22.5 degrees and 45 degrees, this is going to be a versatile powerful saw for different applications. it can be used to cut through wood, wood panels, metal, acrylic, plastic, and tile.
Thanks for the response. I went to Lowes and checked several fences on Dewalts and they are all bowed about the same. But I measured the bow using feeler gages and it’s only about .008 inch, so not really a big deal. Interestingly, the Bosch jobsite saw was perfect for that particular feature. Like you said, stock will hit at the bottom of the fence and for very fine work, I’d probably be using the fence extension which is flat. I just made a picture frame today which requires accurate cuts and along with my Incra miter gage, the saw did a beautiful job. I do love how easy the fence is to move and adjust. I used my dado stack which worked fine. I also made a zero clearance throat plate. What a great tool, all in all.
The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.

dewalt dwe7491 uk Amzon.com


ElectroSawHQ.com is a participant in the Amazon Services LLC Associates Program and the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, amazon.co.uk, amazon.ca, endless.com, smallparts.com, myhabit.com, and any other website that may be affiliated with Amazon Service LLC Associates Program, and the Amazon EU Associates Program.

Flip Over Fence – This is a very cool feature as it provides two useful benefits. When ripping narrow pieces, the flip over fence allows the user to make the cut without interfering with the blade guard. Without this feature the guard would have to be removed. When ripping wide boards, the flip over fence can be locked into a lower position to support the work piece.
Hey Todd, Hope your Holidays were good! I use my tablesaw for a lot of ripping and 2×4 type of work, nothing that detailed usually. Because of your article, and others on-line, I decided to go with the SPT99-13 Skilsaw..found a good price locally and think it will outshine my old (pretty underpowered) Craftsman by a mile. Looking forward to reading more of your reviews, take care and Happy New Year!
Upon unboxing, I wasn’t sure how much I cared that the built-in stand for this saw had wheels, but, boy, did I ever use them. If weather rolled in, the saw folded up and rolled to shelter in the garage. This was extremely convenient since I did my cutting in the driveway and stored the saw in the garage overnight. This maneuverability might be less useful to you if you plan to use the saw primarily in your garage where you could build or buy a semi-permanent stand rather than use the fold-up stand of this model. There is also on-board storage for the power cord and the loose parts such as the miter gauge and guards, making it completely self-contained.
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491 opinie Amzon.com


The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 

dewalt dwe7491 vs dwe7492 Amzon.com


The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.

miter saw table Amazon.com


A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on our job site and in our shop and were impressed with its portability, versatility, performance and power.

dewalt dwe7491 dado throat plate Amzon.com


Thanks for the response. I went to Lowes and checked several fences on Dewalts and they are all bowed about the same. But I measured the bow using feeler gages and it’s only about .008 inch, so not really a big deal. Interestingly, the Bosch jobsite saw was perfect for that particular feature. Like you said, stock will hit at the bottom of the fence and for very fine work, I’d probably be using the fence extension which is flat. I just made a picture frame today which requires accurate cuts and along with my Incra miter gage, the saw did a beautiful job. I do love how easy the fence is to move and adjust. I used my dado stack which worked fine. I also made a zero clearance throat plate. What a great tool, all in all.
A table saw is among the most dangerous power tools in your workshop. If not operated correctly, table saws can cause lots of harm. Different types come with varied safety measures and features like flesh sensors, auto-reset switches, anti-kickback pawls, among others. Finding one with all these features comes at a price, but what is cost compared to your safety?

Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

circular saw table Amazon.com


Over the years there are a few popular table saw brands in the market and two of these are the DeWalt and the Ridgid table saws. The DeWalt compact job site table saw is the latest DeWalt table saw model. This has a 20-inch maximum rip capacity that will let you cut through a variety of materials. This table saw is lightweight, portable with a steel roll cage that will protect the tool against drops and impacts. It has a strong 1850 watt motor to give you pure power for almost all applications. This has a cast table top design to improve accuracy and precision.
It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

table saw bench Amazon.com


DEWALT® table saws are available in both cordless and corded. Our portable table saws are compact for easy transportation between jobsites. They offer a rack and pinion fence system for fast, accurate fence adjustments. Our table saws are lightweight and feature a metal roll cage to ensure they can stand up to a rough jobsite. Tool-free guarding component adjustments make it faster and simpler to adjust as needed. Since the World’s First FLEXVOLT® cordless table saw was introduced, DEWALT has revolutionized the world of cordless construction tools. Every aspect of our table saws are designed to make your job easier.

dewalt dwe7491rs review Amzon.com


Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.

dewalt dwe7491 remove riving knife Amzon.com


Table saws come in a variety of types, sizes, and shapes. As with every other tool, each has its unique features and list of pros and cons. Some of these tools are versatile and can achieve many tasks, but sometimes, finding the perfect one that meets all your needs can be a hassle. The following are things you should consider when you set out to buy your table saw.

table saw stand Amazon.com


The Skilsaw worm drive table saw is considered the first ever brass-geared drive table saw. It is designed to provide maximum power and torque with its powerful 5.0 horsepower motor. This table saw is compact and portable with a solid construction. It has a 25-inch rip capacity and 3- ½ inches depth of material. The Skilsaw worm drive table saw has a self-aligning rip fence with an on-tool storage system. But despite being able to handle tough cutting jobs it stays lightweight at only 49 pounds. You can take the Skilsaw Portable Worm Drive Table Saw anywhere at any time.

DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.
The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

table saw fence Amazon.com


Table saws come in a variety of types, sizes, and shapes. As with every other tool, each has its unique features and list of pros and cons. Some of these tools are versatile and can achieve many tasks, but sometimes, finding the perfect one that meets all your needs can be a hassle. The following are things you should consider when you set out to buy your table saw.
The Skilsaw worm drive table saw is considered the first ever brass-geared drive table saw. It is designed to provide maximum power and torque with its powerful 5.0 horsepower motor. This table saw is compact and portable with a solid construction. It has a 25-inch rip capacity and 3- ½ inches depth of material. The Skilsaw worm drive table saw has a self-aligning rip fence with an on-tool storage system. But despite being able to handle tough cutting jobs it stays lightweight at only 49 pounds. You can take the Skilsaw Portable Worm Drive Table Saw anywhere at any time.

The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.
Todd Fratzel is the Editor of Tool Box Buzz and the President of Front Steps Media, LLC, a web based media company focused on the Home Improvement and Construction Industry.He is also the Principal Engineer for United Construction Corp., located in Newport, NH. In his capacity at United he oversees the Residential and Commercial Building Division along with all Design-Build projects.He is also the editor of Home Construction & Improvement.

Performance – The DWE7491RS performs very well. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade. The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift. This saw also comes with a miter gauge for cross-cutting. The miter gauge isn’t all that great but it gets the job done.
The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

skil worm drive table saw Amazon.com

×