With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491 opinie Amzon.com


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.

dewalt dwe7491 for sale Amzon.com


The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.

miter saw table Amazon.com


The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.

How and where do you intend to use your table saw? If you plan to take it from one worksite to another then you must use a job site table saw A job site saw is portable, compact and usually has its own stand and may or may not have wheels. Stationary table saws are also called bench top saws because these don’t come with a stand. These rely on a table or a workbench to support the weight of the saw. There are also cabinet table saws which are heavy duty saws that are mounted in a metal or cast-iron cabinet. These saws are very heavy but are usually made with moving wheels and complete cutting features.

portable table saw Amazon.com


DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.

small table saw Amazon.com


Chris – Great question. If you break it down a bit you can see why. The table saw uses a much smaller blade so the demand on that saw is actually quite a bit less. Also, if you make the table saw 120, you need another battery, and the conversion cable….the saw becomes VERY expensive. Just my two cents…but I’m fairly sure this is what kept it at 60v….it’s damn impressive though.

10 inch table saw Amazon.com


Over the years there are a few popular table saw brands in the market and two of these are the DeWalt and the Ridgid table saws. The DeWalt compact job site table saw is the latest DeWalt table saw model. This has a 20-inch maximum rip capacity that will let you cut through a variety of materials. This table saw is lightweight, portable with a steel roll cage that will protect the tool against drops and impacts. It has a strong 1850 watt motor to give you pure power for almost all applications. This has a cast table top design to improve accuracy and precision.

Meanwhile, the most updated Ridgid table saw boasts of a heavy duty portable body with stand. This has a 15-amp motor with 4000 rpm. This is an updated table saw that provides a single-point release for simple assembly and disassembly. This Ridgid table saw offers an onboard storage system for your miter gauge, blades, rip fence and other important accessories. This is a handy, compact and portable power table saw you just might need in your workshop or worksite.

chicago electric table saw Amazon.com


Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

dewalt dwe7491 test Amzon.com


It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

table saw bench Amazon.com


DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.


In any Dewalt DWE7491RS review, it is clear that its drawbacks are minor. The throat plate lock could do with a bit of quality work. Also, if the dust port offered effective use with an accessory package or so, the dust cleaning would be much more ideal. The best part is, these issues are a trade-off, considering the overall performance. You can purchase it without hesitating.
The Dewalt Cordless 8-1/4” Table Saw power switch is located on the front, lower left area of the saw and has a large red stop switch that can also be accessed easily with your knee. The power switch is electronic and the saw operator now has to push a green “on” button as opposed to pulling on the “red” power lever as was the case with older models.  The power switch also has a flip over safety cover that can be secured with a pad lock. The padlock hole diameter requires a ¼” maximum diameter padlock
The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.
The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

used table saw Amazon.com


The DeWalt is a 7 ¼” worm drive circular saw that is lightweight at only 14 pounds. It is light so it’s good for daily use outdoors or in the field. It is made from magnesium that gives you a strong but light saw. This has an extra-wide saw hook that accepts material up to 2- ½ inches wide. This DeWalt circular saw has a tough cord protection system to give you 4 times improved cord jerk protection. Along with its 53-degree bevel capacity which detents at 22.5 degrees and 45 degrees, this is going to be a versatile powerful saw for different applications. it can be used to cut through wood, wood panels, metal, acrylic, plastic, and tile.
I have always wanted a worm drive table saw for myself considering that I work constantly on the road. But as I checked the best type of portable table saw, I found not just the Skilsaw worm drive table but also a worm drive table saw from DeWalt. These two table saws are the best of their category. These have updated and top of the line features. If you are like me, shopping for the ideal portable table saw, then you will surely find the one you need from these top picks. 
The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dw745-xe vs dwe7491-xe Amzon.com


The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.

ryobi table saw home depot Amazon.com


The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

table saw Amazon.com


The DWE7490X is a great table saw that guarantees convenience and flexibility thanks to its scissor stand. It has been exceptionally designed with a stand that makes the job easier when setting it up. Also, it combines portability and power into one very convenient table saw. Unfortunately, some will find the 87 pounds a bit of a stretch in terms of carrying it around.
Over the years there are a few popular table saw brands in the market and two of these are the DeWalt and the Ridgid table saws. The DeWalt compact job site table saw is the latest DeWalt table saw model. This has a 20-inch maximum rip capacity that will let you cut through a variety of materials. This table saw is lightweight, portable with a steel roll cage that will protect the tool against drops and impacts. It has a strong 1850 watt motor to give you pure power for almost all applications. This has a cast table top design to improve accuracy and precision.
The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dw745-xe vs dwe7491-xe Amzon.com


The first ever brass-geared worm drive table saw was first developed by Skilsaw to meet the growing needs of woodworkers on the go. Call this a sophisticated portable table saw, the Skilsaw Worm Drive Table Saw is the first ever saw that can be set up anywhere and once you are done, it can be folded and packed away. This foldable and compact table saw has made it possible to cut materials faster even in remote construction sites.
The latest DeWalt Table Saw is a compact 10-inch job site power saw with a number of great features. First of all, it has a rack and pinion telescoping fence which will let you make fence adjustments easily. This saw has a 24-inch rip capacity so you can use this for a variety of materials. It has an onboard storage system so you can carry tools with ease. 

dewalt dwe7491 with stand Amzon.com


Hey Todd, Hope your Holidays were good! I use my tablesaw for a lot of ripping and 2×4 type of work, nothing that detailed usually. Because of your article, and others on-line, I decided to go with the SPT99-13 Skilsaw..found a good price locally and think it will outshine my old (pretty underpowered) Craftsman by a mile. Looking forward to reading more of your reviews, take care and Happy New Year!

dewalt dwe7491 manual Amzon.com


Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.

dewalt dwe7491 remove riving knife Amzon.com


Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

bordssåg - dewalt dwe7491-qs Amzon.com


Hey all. I just got this saw upgrading from few previous model. I thought this is the best potable table saw. I assembled all and I began adjusting blade squareness. I squared on the left side of blade and thought it’s good but guess what, when I put a square on the other side of the blade it was way out!! I said myself NO WAY! Checked few more times but same result! So I put my 4foot level across the table. OMG! It was a cup towards its middle by almost 1/16″!! WTF!! I just could not believe my eyes!! I am a pro carpenter and long time Dewalt lover but now I am sooooo disappointed what I just saw. I’m gonna write Dewalt and see what they say about it.

table saw for sale Amazon.com


The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade. 

table saw table Amazon.com


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.
Got mine yesterday. Set it up. Cuts very fast. My concern is when I put a straight edge against the fence vertically, it only touches the fence at the top and bottom. There’s about a 0.025″ gap in the middle. Is this a concern for accuracy? I guess I could add a thin piece of hardwood to the face of the fence to make it more flat and perpendicular. I also don’t find an adjustment for the perpendicularity of the fence face to the table. Any thoughts?
This particular table saw features a high-torque motor of 15-amp, which is suitable for cutting hardwoods as well as the pressure treated timber. This is also aided by a speed of 4800RPM. The tool also features a rack, as well as a pinion telescoping fence rail that creates accurate, meticulous, and smooth fence adjustments. You can flip over the fence to make small and precision rip cuts.
Todd Fratzel is the Editor of Tool Box Buzz and the President of Front Steps Media, LLC, a web based media company focused on the Home Improvement and Construction Industry.He is also the Principal Engineer for United Construction Corp., located in Newport, NH. In his capacity at United he oversees the Residential and Commercial Building Division along with all Design-Build projects.He is also the editor of Home Construction & Improvement.

shop series table saw Amazon.com

×