Performance – The DWE7491RS performs very well. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade. The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift. This saw also comes with a miter gauge for cross-cutting. The miter gauge isn’t all that great but it gets the job done.

dewalt dwe7491 qs Amzon.com


The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dw745-xe vs dwe7491-xe Amzon.com


The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.
I have always wanted a worm drive table saw for myself considering that I work constantly on the road. But as I checked the best type of portable table saw, I found not just the Skilsaw worm drive table but also a worm drive table saw from DeWalt. These two table saws are the best of their category. These have updated and top of the line features. If you are like me, shopping for the ideal portable table saw, then you will surely find the one you need from these top picks. 
Chris – Great question. If you break it down a bit you can see why. The table saw uses a much smaller blade so the demand on that saw is actually quite a bit less. Also, if you make the table saw 120, you need another battery, and the conversion cable….the saw becomes VERY expensive. Just my two cents…but I’m fairly sure this is what kept it at 60v….it’s damn impressive though.

used table saws for sale Amazon.com


DEWALT® table saws are available in both cordless and corded. Our portable table saws are compact for easy transportation between jobsites. They offer a rack and pinion fence system for fast, accurate fence adjustments. Our table saws are lightweight and feature a metal roll cage to ensure they can stand up to a rough jobsite. Tool-free guarding component adjustments make it faster and simpler to adjust as needed. Since the World’s First FLEXVOLT® cordless table saw was introduced, DEWALT has revolutionized the world of cordless construction tools. Every aspect of our table saws are designed to make your job easier.
The Dewalt Cordless 8-1/4” Table Saw power switch is located on the front, lower left area of the saw and has a large red stop switch that can also be accessed easily with your knee. The power switch is electronic and the saw operator now has to push a green “on” button as opposed to pulling on the “red” power lever as was the case with older models.  The power switch also has a flip over safety cover that can be secured with a pad lock. The padlock hole diameter requires a ¼” maximum diameter padlock
The first problem I had was trying to outfit some sort of “Y” and hose to tee off my main dust port and attach to the upper one (2-1/2″ to 1-1/4″ “Y’s” are not that common). Then, if the smaller hose on top doesn’t fall to the side, it interferes with the wood you’re trying to cut. After talking to the product manager it sounds like this detail evolved in Europe and found it’s way here. I’ve basically abandoned the upper port and just use the lower one. Cool idea, but it needs some serious redesign and/or an accessory to help make it easier to hook up.

dewalt dwe7491 throat plate Amzon.com


The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dwe7491 best price Amzon.com


The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

dewalt dwe7491rs vs bosch 4100-10 Amzon.com


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous. 

dewalt dwe7491 opinie Amzon.com


The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.

They are common, the lightest, and perhaps the cheapest. Portable table saw reviews show that these kinds of saws are the popular choice for homeowners looking to carry out simple tasks. The motors aren’t that powerful, some have tabletops that are retractable and can be moved from one place to another. They are inexpensive. The problem is that most have poorly built miter gauges and fences.


The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dwe7491-xe price Amzon.com


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

dewalt zaagtafel dwe7491 Amzon.com


The first problem I had was trying to outfit some sort of “Y” and hose to tee off my main dust port and attach to the upper one (2-1/2″ to 1-1/4″ “Y’s” are not that common). Then, if the smaller hose on top doesn’t fall to the side, it interferes with the wood you’re trying to cut. After talking to the product manager it sounds like this detail evolved in Europe and found it’s way here. I’ve basically abandoned the upper port and just use the lower one. Cool idea, but it needs some serious redesign and/or an accessory to help make it easier to hook up.

dewalt dwe7491 dimensions Amzon.com


Hey all. I just got this saw upgrading from few previous model. I thought this is the best potable table saw. I assembled all and I began adjusting blade squareness. I squared on the left side of blade and thought it’s good but guess what, when I put a square on the other side of the blade it was way out!! I said myself NO WAY! Checked few more times but same result! So I put my 4foot level across the table. OMG! It was a cup towards its middle by almost 1/16″!! WTF!! I just could not believe my eyes!! I am a pro carpenter and long time Dewalt lover but now I am sooooo disappointed what I just saw. I’m gonna write Dewalt and see what they say about it.

table saw for sale Amazon.com


The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dwe7491rs Amzon.com


Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

band saw vs table saw Amazon.com

×