With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491rs dado Amzon.com


I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

table saw extension Amazon.com


I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

dewalt dwe7491 vs makita 2704 Amzon.com


There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.
Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.
I’ve had this table saw about a year and have had very good results making precision cuts with the rip fence. Ease of use has been great. Get it out set up and get to making cuts fast. I am not making a daily living with it so I may not notice some short comings that daily users would. Maybe like with hand tools, someone won’t notice the difference between Snap-on or Craftsman wrenches until you make a living with them.
The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dwe7491 best price Amzon.com


The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.

dewalt dwe7491-gb Amzon.com


Blades come in various types and sizes. There are rip blades for cutting along the wood grains, hollow ground blades ideal for various materials, crosscut blades suitable for smooth and precise cuts, and combination blades for that double up as blades for crosscutting and ripping. Depending on what you do the most, it’s necessary to choose the right blade type and size that will get the job done with the most ease.

dewalt dwe7491x Amzon.com


A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.

industrial table saw Amazon.com


The power switch is a bit finicky.  I noticed this at their media event and also when using the saw.  A quick press of the on button does not work and it seems that you have to press the button for a few seconds.  Additionally, you need to push this button straight on and not at an angle to work.  My guess is That Dewalt will work this out in time.

cabinet table saw Amazon.com


It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

sliding table saw Amazon.com


The design is among the first ones to vary voltage in alignment to the outfitted tool. Its versatility is unmatched. The battery usage can be easily shared as you customize the operation itself. Because of its lightweight and small nature, users can easily move it from one place to another. It also doesn’t require lots of space, which is why it is perfect for home garages and commercial spaces alike.
DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.
The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.
There’s not doubt that many are finding issues with these saws. However, a bit of perspective is likely in order. These are not stationary saws, never will be as no one wants to move around a 500lb beast from job to job. There are thousands and thousands of these on job sites and guys are making a living with them. If we need really precise cuts in the field we either use a track saw or we bring the piece back to the shop. I’m with you…it would be great to have precision in the field…but it’s all a trade off…money and weight. We’ve had great luck from these saws and we use them daily.

dewalt dwe7491 kaina Amzon.com


Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

dewalt dwe7491 table saw manual Amzon.com


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491 opinie Amzon.com


This particular Dewalt table saw is our choice for commercial use. It features a 15-amp motor, which has an amazing speed of 4800 rpm. So, if you’re looking for a saw that incorporates high torque and power, this is one you shouldn’t pass up. The high number of spins in a minute can rip through several types of woods, which is why this model is ideal for different types of applications.

best portable table saw Amazon.com


Table saws come in a variety of types, sizes, and shapes. As with every other tool, each has its unique features and list of pros and cons. Some of these tools are versatile and can achieve many tasks, but sometimes, finding the perfect one that meets all your needs can be a hassle. The following are things you should consider when you set out to buy your table saw.
Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.
Performance – The DWE7491RS performs very well. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade. The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift. This saw also comes with a miter gauge for cross-cutting. The miter gauge isn’t all that great but it gets the job done.
There’s not doubt that many are finding issues with these saws. However, a bit of perspective is likely in order. These are not stationary saws, never will be as no one wants to move around a 500lb beast from job to job. There are thousands and thousands of these on job sites and guys are making a living with them. If we need really precise cuts in the field we either use a track saw or we bring the piece back to the shop. I’m with you…it would be great to have precision in the field…but it’s all a trade off…money and weight. We’ve had great luck from these saws and we use them daily.

dewalt dwe7491 kaina Amzon.com


There is a variety of table saw accessories to keep in mind. Just some of the most common are table extensions, on and off switches, wheels, onboard storage and dust collection features. Additional blades, wrenches, and tables are also a must. Remember that a table saw set is better than a bare tool because you will end up spending more as you buy accessories piece by piece.
Todd Fratzel is the Editor of Tool Box Buzz and the President of Front Steps Media, LLC, a web based media company focused on the Home Improvement and Construction Industry.He is also the Principal Engineer for United Construction Corp., located in Newport, NH. In his capacity at United he oversees the Residential and Commercial Building Division along with all Design-Build projects.He is also the editor of Home Construction & Improvement.

shop series table saw Amazon.com

×