This stand is one of the easier stands to set up that I’ve used. To fold the stand up you simply stand the saw up on it’s end. Then the 4 legs fold down by releasing easy to use levers. It takes less than a minute to set the saw up and there are no tools required. The large wheels and comfortable height handle make rolling the saw and stand super easy.
Chris – Great question. If you break it down a bit you can see why. The table saw uses a much smaller blade so the demand on that saw is actually quite a bit less. Also, if you make the table saw 120, you need another battery, and the conversion cable….the saw becomes VERY expensive. Just my two cents…but I’m fairly sure this is what kept it at 60v….it’s damn impressive though.
10 inch table saw Amazon.com
A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.
industrial table saw Amazon.com
Further testing showed that the red “Stop” lever was the cause, not the power switch. After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off. After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high. The units we tested was from a “manufacturing sample lot.” MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.