How and where do you intend to use your table saw? If you plan to take it from one worksite to another then you must use a job site table saw A job site saw is portable, compact and usually has its own stand and may or may not have wheels. Stationary table saws are also called bench top saws because these don’t come with a stand. These rely on a table or a workbench to support the weight of the saw. There are also cabinet table saws which are heavy duty saws that are mounted in a metal or cast-iron cabinet. These saws are very heavy but are usually made with moving wheels and complete cutting features.

dewalt model dwe7491rs Amzon.com


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.

table saw stand Amazon.com


The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.

Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.

laguna f2 table saw Amazon.com


Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.

cabinet saw Amazon.com


This particular table saw features a high-torque motor of 15-amp, which is suitable for cutting hardwoods as well as the pressure treated timber. This is also aided by a speed of 4800RPM. The tool also features a rack, as well as a pinion telescoping fence rail that creates accurate, meticulous, and smooth fence adjustments. You can flip over the fence to make small and precision rip cuts.
Typically sold for around $600, the DeWalt isn’t exactly cheap, and you can find similar portable table saws for less. DeWalt itself has several other jobsite table saws for lower prices, though they either lack a stand or feature a flimsier one. However, if you value a sturdy stand and the ability to wheel the collapsed unit around, it’s easy to justify the modest extra expense for this saw.

dewalt dwe7491rs home depot Amzon.com


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.
The first problem I had was trying to outfit some sort of “Y” and hose to tee off my main dust port and attach to the upper one (2-1/2″ to 1-1/4″ “Y’s” are not that common). Then, if the smaller hose on top doesn’t fall to the side, it interferes with the wood you’re trying to cut. After talking to the product manager it sounds like this detail evolved in Europe and found it’s way here. I’ve basically abandoned the upper port and just use the lower one. Cool idea, but it needs some serious redesign and/or an accessory to help make it easier to hook up.

dewalt dwe7491 throat plate Amzon.com


Thanks for the response. I went to Lowes and checked several fences on Dewalts and they are all bowed about the same. But I measured the bow using feeler gages and it’s only about .008 inch, so not really a big deal. Interestingly, the Bosch jobsite saw was perfect for that particular feature. Like you said, stock will hit at the bottom of the fence and for very fine work, I’d probably be using the fence extension which is flat. I just made a picture frame today which requires accurate cuts and along with my Incra miter gage, the saw did a beautiful job. I do love how easy the fence is to move and adjust. I used my dado stack which worked fine. I also made a zero clearance throat plate. What a great tool, all in all.
The DWE7490X is a great table saw that guarantees convenience and flexibility thanks to its scissor stand. It has been exceptionally designed with a stand that makes the job easier when setting it up. Also, it combines portability and power into one very convenient table saw. Unfortunately, some will find the 87 pounds a bit of a stretch in terms of carrying it around.
Meanwhile, the most updated Ridgid table saw boasts of a heavy duty portable body with stand. This has a 15-amp motor with 4000 rpm. This is an updated table saw that provides a single-point release for simple assembly and disassembly. This Ridgid table saw offers an onboard storage system for your miter gauge, blades, rip fence and other important accessories. This is a handy, compact and portable power table saw you just might need in your workshop or worksite.

chicago electric table saw Amazon.com


Hey all. I just got this saw upgrading from few previous model. I thought this is the best potable table saw. I assembled all and I began adjusting blade squareness. I squared on the left side of blade and thought it’s good but guess what, when I put a square on the other side of the blade it was way out!! I said myself NO WAY! Checked few more times but same result! So I put my 4foot level across the table. OMG! It was a cup towards its middle by almost 1/16″!! WTF!! I just could not believe my eyes!! I am a pro carpenter and long time Dewalt lover but now I am sooooo disappointed what I just saw. I’m gonna write Dewalt and see what they say about it.

table saw for sale Amazon.com


I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

dewalt dwe7491rs without stand Amzon.com


The blade is adjustable from 0-45 degrees for a variety of bevel applications. This DeWalt Table Saw has a 15-amp motor for cutting hardwood and even pressure-treated lumber. This will let you make cuts to a depth of 3- 1/8 inches at 90 degrees and 2 – ¼ inches at 45 degrees. Other important features include a coated table surface and a metal roll cage to protect the tool. This weighs 45 pounds and therefore it is easy to lift and take to your workspace or at the worksite.

dewalt dwe7491 best price Amzon.com


The power switch is a bit finicky.  I noticed this at their media event and also when using the saw.  A quick press of the on button does not work and it seems that you have to press the button for a few seconds.  Additionally, you need to push this button straight on and not at an angle to work.  My guess is That Dewalt will work this out in time.
Prior to deploying the power loss reset feature there had been many job site horror stories of unattended table saws starting up upon power restoration.  Sometimes this restart caused material damage or personal injury.   This usually happened when the saw operator did not think to turn off the tool before walking away to go restore power. In the meantime, other people have leaned on, temporarily placed tools or even building materials on the saw, a blade spinning disaster waiting to happen.

track saw vs table saw Amazon.com

×