DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.
The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.
I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

dewalt dwe7491 vs makita 2704 Amzon.com


In any Dewalt DWE7491RS review, it is clear that its drawbacks are minor. The throat plate lock could do with a bit of quality work. Also, if the dust port offered effective use with an accessory package or so, the dust cleaning would be much more ideal. The best part is, these issues are a trade-off, considering the overall performance. You can purchase it without hesitating.
A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.

Performance – The DWE7491RS performs very well. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade. The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift. This saw also comes with a miter gauge for cross-cutting. The miter gauge isn’t all that great but it gets the job done.

dewalt dwe7491 qs Amzon.com


There’s not doubt that many are finding issues with these saws. However, a bit of perspective is likely in order. These are not stationary saws, never will be as no one wants to move around a 500lb beast from job to job. There are thousands and thousands of these on job sites and guys are making a living with them. If we need really precise cuts in the field we either use a track saw or we bring the piece back to the shop. I’m with you…it would be great to have precision in the field…but it’s all a trade off…money and weight. We’ve had great luck from these saws and we use them daily.

dewalt dwe7491 kaina Amzon.com


Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

circular saw table Amazon.com


This stand is one of the easier stands to set up that I’ve used. To fold the stand up you simply stand the saw up on it’s end. Then the 4 legs fold down by releasing easy to use levers. It takes less than a minute to set the saw up and there are no tools required. The large wheels and comfortable height handle make rolling the saw and stand super easy.
Let me start by saying thank you for all of the in depth reviews you provide all of us. I find them extremely useful when making new purchases. Regarding the power adapter issue with the 60v table saw, I own the Dewalt DCV581H 18v/20V MAX Cordless/Corded Wet-Dry Vacuum and it does not require a special adapter that costs over $100, like the FlexVolt Miter Saws. Seems like the 60v tablesaw or the 120v miter saw could simply come with a cord, just like the vacuum.

miter saw table Amazon.com


Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.
DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.

table saw blades Amazon.com


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491 opinie Amzon.com


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.

I have read dozens of reviews for Dewalt,Bosch,Baileigh,Grizzly and others and from my perspective (regarding Dewalt at least), Black&dDecker/Stanley have turned the product line , for the most part into junk. I have read reviews that indicate outright, that the table is not level, the fence is warped and if you want accurate cuts, then possibly you should look elsewhere.

dewalt dwe7491 nz Amzon.com


The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 
Professionals and DIY enthusiasts who value excellent woodworking know that a table saw is the most important investment they could ever make. The tool doesn’t just help you make precision cuts to make your work easier, but it also reduces woodworking expenses. Moreover, some of these tools can even be optimized to cut other materials, like plastic! The question we'll address today is: which are the best table saws out there?

dewalt dwe74911 Amzon.com


The design is among the first ones to vary voltage in alignment to the outfitted tool. Its versatility is unmatched. The battery usage can be easily shared as you customize the operation itself. Because of its lightweight and small nature, users can easily move it from one place to another. It also doesn’t require lots of space, which is why it is perfect for home garages and commercial spaces alike.

porter cable table saw Amazon.com


Copyright 2018 by Cut The Wood. CutTheWood.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, CutTheWood.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.
A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.
A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on our job site and in our shop and were impressed with its portability, versatility, performance and power.

dewalt dwe7491 dado throat plate Amzon.com


I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

table saw extension Amazon.com


There’s not doubt that many are finding issues with these saws. However, a bit of perspective is likely in order. These are not stationary saws, never will be as no one wants to move around a 500lb beast from job to job. There are thousands and thousands of these on job sites and guys are making a living with them. If we need really precise cuts in the field we either use a track saw or we bring the piece back to the shop. I’m with you…it would be great to have precision in the field…but it’s all a trade off…money and weight. We’ve had great luck from these saws and we use them daily.

dewalt dwe7491 kaina Amzon.com


Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.

best table saw 2020 Amazon.com

×