Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

dewalt dwe7491 test Amzon.com


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

dewalt dwe7491 cena Amzon.com


Chris – Great question. If you break it down a bit you can see why. The table saw uses a much smaller blade so the demand on that saw is actually quite a bit less. Also, if you make the table saw 120, you need another battery, and the conversion cable….the saw becomes VERY expensive. Just my two cents…but I’m fairly sure this is what kept it at 60v….it’s damn impressive though.

10 inch table saw Amazon.com


Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

bordssåg - dewalt dwe7491-qs Amzon.com


Performance – The DWE7491RS performs very well. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade. The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift. This saw also comes with a miter gauge for cross-cutting. The miter gauge isn’t all that great but it gets the job done.

dewalt dwe7491 qs Amzon.com


Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.

Going through hybrid table saw reviews, you can tell that accuracy is a bit less compared to cabinet saws and contractor table saws. This is no surprise as the other two are large with lots of operating power. Hybrid table saws are lightweight and can be moved easily from one location to another. The working space on the tabletop is less and cannot accommodate large pieces. They’re also a lot more wallet-friendly.


The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.
Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.

cabinet saw Amazon.com


A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.

industrial table saw Amazon.com


DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.

On the other hand, the DeWalt Worm Drive Circular Saw is only the circular saw power tool minus any foldable table. This saw is portable, handheld and is lightweight at 13.8 pounds. It may not be a portable table saw but it works great in ripping material up to 2 – ½ inches wide. It is quality made with a durable cast magnesium footplate for a solid cutting platform.

Product reviews on this site contain our opinion of a product or service. We will always strive for objectivity and transparency in our reviews. Our goal is to provide readers with honest, objective information based on our own experiences. We never have and never will accept payment in exchange for a positive review. Many of the products that we review are provided to us for free by a manufacturer or retailer. In some cases, we also have advertising or affiliate relationships with manufacturers and retailers of products and services we review. For additional information please visit our additional disclosure policies.


Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.
It accommodates a clean workspace with its dust port that you can link to the external accessories to keep that messy dust away. The face is great, easy to set up, and in its category, it is the best fence. You can adjust it with accuracy and quickly use the pinion fence rail and the rack. The only complaint is perhaps the miter gauge, otherwise, DeWalt DW745 is the best table saw you could ever have.

sliding table saw Amazon.com


With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

The design is among the first ones to vary voltage in alignment to the outfitted tool. Its versatility is unmatched. The battery usage can be easily shared as you customize the operation itself. Because of its lightweight and small nature, users can easily move it from one place to another. It also doesn’t require lots of space, which is why it is perfect for home garages and commercial spaces alike.

circular saw table Amazon.com


ElectroSawHQ.com is a participant in the Amazon Services LLC Associates Program and the Amazon EU Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com, amazon.co.uk, amazon.ca, endless.com, smallparts.com, myhabit.com, and any other website that may be affiliated with Amazon Service LLC Associates Program, and the Amazon EU Associates Program.
Thanks for the response. I went to Lowes and checked several fences on Dewalts and they are all bowed about the same. But I measured the bow using feeler gages and it’s only about .008 inch, so not really a big deal. Interestingly, the Bosch jobsite saw was perfect for that particular feature. Like you said, stock will hit at the bottom of the fence and for very fine work, I’d probably be using the fence extension which is flat. I just made a picture frame today which requires accurate cuts and along with my Incra miter gage, the saw did a beautiful job. I do love how easy the fence is to move and adjust. I used my dado stack which worked fine. I also made a zero clearance throat plate. What a great tool, all in all.
The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.

table saw router table Amazon.com


The Dewalt Cordless 8-1/4” Table Saw power switch is located on the front, lower left area of the saw and has a large red stop switch that can also be accessed easily with your knee. The power switch is electronic and the saw operator now has to push a green “on” button as opposed to pulling on the “red” power lever as was the case with older models.  The power switch also has a flip over safety cover that can be secured with a pad lock. The padlock hole diameter requires a ¼” maximum diameter padlock

The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 

best table saw under 500 Amazon.com

×