Robert Robillard is a remodeler, general contractor, and principal of a carpentry and renovation business located in Concord, Massachusetts, and serves as the Editor of Tool Box Buzz and founding editor of A Concord Carpenter . Rob is in charge of our Tool and Product Review - Tool and Product Review - Video Channel, , where we post all of our tool reviews and video tutorials. Rob enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the remodeling industry. The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

dewalt klyvsåg dwe7491 Amzon.com


The “Work Support / Narrow Ripping Fence” option is a nice addition and one that I have come to enjoy on Dewalt saws.  When used as a support feature it helps keep boards wider than the table top from dipping down when the fence is extended. When used as a narrow rip accessory it provides an extra 2-inches of clearance between the blade and the fence. This helps keep you hand further away from the spinning blade.
None of your woodworking projects will go wrong if you have the best table saw for your individual needs. Hopefully, with the above table saw reviews, you now have enough info to find your right fit. Although a comparison between the DWE7480 vs DW745 shows almost the same great features, our top pick is the DW745. Although it is small for some people, it is durable, has good speeds, is powerful, and most importantly, it is budget-friendly.

The power switch is a bit finicky.  I noticed this at their media event and also when using the saw.  A quick press of the on button does not work and it seems that you have to press the button for a few seconds.  Additionally, you need to push this button straight on and not at an angle to work.  My guess is That Dewalt will work this out in time.

There’s not doubt that many are finding issues with these saws. However, a bit of perspective is likely in order. These are not stationary saws, never will be as no one wants to move around a 500lb beast from job to job. There are thousands and thousands of these on job sites and guys are making a living with them. If we need really precise cuts in the field we either use a track saw or we bring the piece back to the shop. I’m with you…it would be great to have precision in the field…but it’s all a trade off…money and weight. We’ve had great luck from these saws and we use them daily.

dewalt dwe7491 kaina Amzon.com


DEWALT’s recent release of three new job site table saws is capped off with the all new DWE7491RS. This 10″ job site table saw with roller stand is their premium offering. We recently also reviewed the DWE7480 and DWE7490X which were released with this saw. The DWE7491RS is very similar to the DWE7490X except that it has a larger rip capacity and a much nicer stand.

dewalt dwe7491 dado Amzon.com


The DeWalt doesn’t go above and beyond here but has some standard safety equipment as part of its Site-Pro Guarding System. The Blade Guard Assembly is a standard clear plastic set of guards that allows the wood to be fed to the blade but shields you from putting hands on the exposed blade in a slip. The guards will lock in a raised position when you need to see the blade—for example, when adjusting the blade height—which lessens the temptation to remove this safety feature when it’s in your way.

dewalt dwe7491 uk Amzon.com


Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.

cabinet saw Amazon.com


At the Dewalt media event I inquired whether an accessory power cord was in the making, so users could plug into a power outlet for AC current.  Having both options would be nice. The dual option would be handy on construction sites with no power.  On these sites contractors often compete with extension cords for a generator outlet.  Having a cordless option for these situations would be amazing, later on, when the house has power, you could plug in.
A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.

laguna table saw Amazon.com


This stand is one of the easier stands to set up that I’ve used. To fold the stand up you simply stand the saw up on it’s end. Then the 4 legs fold down by releasing easy to use levers. It takes less than a minute to set the saw up and there are no tools required. The large wheels and comfortable height handle make rolling the saw and stand super easy.

10 inch table saw Amazon.com


Robert Robillard is a remodeler, general contractor, and principal of a carpentry and renovation business located in Concord, Massachusetts, and serves as the Editor of Tool Box Buzz and founding editor of A Concord Carpenter . Rob is in charge of our Tool and Product Review - Tool and Product Review - Video Channel, , where we post all of our tool reviews and video tutorials. Rob enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the remodeling industry. The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere.

dewalt dwe7491 Amzon.com


I have always wanted a worm drive table saw for myself considering that I work constantly on the road. But as I checked the best type of portable table saw, I found not just the Skilsaw worm drive table but also a worm drive table saw from DeWalt. These two table saws are the best of their category. These have updated and top of the line features. If you are like me, shopping for the ideal portable table saw, then you will surely find the one you need from these top picks. 
This particular Dewalt table saw is our choice for commercial use. It features a 15-amp motor, which has an amazing speed of 4800 rpm. So, if you’re looking for a saw that incorporates high torque and power, this is one you shouldn’t pass up. The high number of spins in a minute can rip through several types of woods, which is why this model is ideal for different types of applications.

best portable table saw Amazon.com


Todd Fratzel is the Editor of Tool Box Buzz and the President of Front Steps Media, LLC, a web based media company focused on the Home Improvement and Construction Industry.He is also the Principal Engineer for United Construction Corp., located in Newport, NH. In his capacity at United he oversees the Residential and Commercial Building Division along with all Design-Build projects.He is also the editor of Home Construction & Improvement.

dewalt dwe7491 anti kickback Amzon.com


The design is among the first ones to vary voltage in alignment to the outfitted tool. Its versatility is unmatched. The battery usage can be easily shared as you customize the operation itself. Because of its lightweight and small nature, users can easily move it from one place to another. It also doesn’t require lots of space, which is why it is perfect for home garages and commercial spaces alike.
Now I am supposed to box it up (an enormously difficult task in itself because how tightly it is packed), somehow pick up a 110lb 4′ x 3′ x 3′ box (with weak cardboard that tears if you use the included handles) on my own to put it into my vehicle, drive to the nearest store (an hour round trip), somehow get a 110lb 4′ x 3′ x 3′ box out of the vehicle, lug it into the store, wait in line to return it, then presumably wait while another one is shipped to me (the local store has none of these in stock).

best table saw Amazon.com


The Dewalt Cordless 8-1/4” Table Saw power switch is located on the front, lower left area of the saw and has a large red stop switch that can also be accessed easily with your knee. The power switch is electronic and the saw operator now has to push a green “on” button as opposed to pulling on the “red” power lever as was the case with older models.  The power switch also has a flip over safety cover that can be secured with a pad lock. The padlock hole diameter requires a ¼” maximum diameter padlock

table saw deals Amazon.com


What is a fence? How important is it in a table saw? It gives you an option for horizontal or vertical adjustments. A good rip fence should be aligned to the blade at all times. Without a fence, everything will be disgusting. Ensure that it is heavy and that it can glide smoothly across the rails. Also, make sure that the locking mechanism is perfect and convenient.
Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.
Hey Todd, Hope your Holidays were good! I use my tablesaw for a lot of ripping and 2×4 type of work, nothing that detailed usually. Because of your article, and others on-line, I decided to go with the SPT99-13 Skilsaw..found a good price locally and think it will outshine my old (pretty underpowered) Craftsman by a mile. Looking forward to reading more of your reviews, take care and Happy New Year! 

dewalt dwe7491 manual Amzon.com


Chris – Great question. If you break it down a bit you can see why. The table saw uses a much smaller blade so the demand on that saw is actually quite a bit less. Also, if you make the table saw 120, you need another battery, and the conversion cable….the saw becomes VERY expensive. Just my two cents…but I’m fairly sure this is what kept it at 60v….it’s damn impressive though.

used table saws for sale Amazon.com


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.


Flip Over Fence – This is a very cool feature as it provides two useful benefits. When ripping narrow pieces, the flip over fence allows the user to make the cut without interfering with the blade guard. Without this feature the guard would have to be removed. When ripping wide boards, the flip over fence can be locked into a lower position to support the work piece.

With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491 opinie Amzon.com


There’s not doubt that many are finding issues with these saws. However, a bit of perspective is likely in order. These are not stationary saws, never will be as no one wants to move around a 500lb beast from job to job. There are thousands and thousands of these on job sites and guys are making a living with them. If we need really precise cuts in the field we either use a track saw or we bring the piece back to the shop. I’m with you…it would be great to have precision in the field…but it’s all a trade off…money and weight. We’ve had great luck from these saws and we use them daily.

dewalt dwe7491 kaina Amzon.com


The power switch is a bit finicky.  I noticed this at their media event and also when using the saw.  A quick press of the on button does not work and it seems that you have to press the button for a few seconds.  Additionally, you need to push this button straight on and not at an angle to work.  My guess is That Dewalt will work this out in time.
The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.
I only have two minor concerns with this saw but they are so small that this saw still gets a 5 star rating.  DEWALT could step up the game on the dust collection if they offer users an effective way of using the dust port on the blade guard. Maybe they offer an accessory splitter and hose package. My other concern is the plastic parts on the fence where it connects to the table. I suspect those parts could break when they are cold if you remove the fence and toss it in the trailer or back of your truck. Again, these are minor in comparison to the rest of the saw (food for thought on the next design).

dewalt dwe7491rs without stand Amzon.com


A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.

industrial table saw Amazon.com


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

dewalt zaagtafel dwe7491 Amzon.com


The roller stand that comes with the DWE7491RS is extremely effective and easy to use. One of my biggest concerns when buying a job site table saw is mobility and ease of set-up for one person. Weighing 90 lbs, saws like these can be a serious lifting hazard for one person. So having a mobile solution that allows a single worker to set this saw up is a hugely important issue for me and many other users.
At the Dewalt media event I inquired whether an accessory power cord was in the making, so users could plug into a power outlet for AC current.  Having both options would be nice. The dual option would be handy on construction sites with no power.  On these sites contractors often compete with extension cords for a generator outlet.  Having a cordless option for these situations would be amazing, later on, when the house has power, you could plug in. 

porter cable table saw recall Amazon.com

×