Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491rs dado Amzon.com


A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.
The power switch is a bit finicky.  I noticed this at their media event and also when using the saw.  A quick press of the on button does not work and it seems that you have to press the button for a few seconds.  Additionally, you need to push this button straight on and not at an angle to work.  My guess is That Dewalt will work this out in time.

dewalt dwe7491 miter slot Amzon.com


I have always wanted a worm drive table saw for myself considering that I work constantly on the road. But as I checked the best type of portable table saw, I found not just the Skilsaw worm drive table but also a worm drive table saw from DeWalt. These two table saws are the best of their category. These have updated and top of the line features. If you are like me, shopping for the ideal portable table saw, then you will surely find the one you need from these top picks. 


The shark fin-style riving knife behind the blade keeps cut pieces from binding and causing kickback. The included push stick is useful when using thinner workpieces that don’t allow your hand to be at least 4 inches from the blade. The power button’s flip cover ensures that you only turn the blade on when you mean to, which is a welcome layer of safety. 

dewalt dwe7491 vs dwe7492 Amzon.com


This particular Dewalt table saw is our choice for commercial use. It features a 15-amp motor, which has an amazing speed of 4800 rpm. So, if you’re looking for a saw that incorporates high torque and power, this is one you shouldn’t pass up. The high number of spins in a minute can rip through several types of woods, which is why this model is ideal for different types of applications.

dewalt dwe7491 blade change Amzon.com


What is a fence? How important is it in a table saw? It gives you an option for horizontal or vertical adjustments. A good rip fence should be aligned to the blade at all times. Without a fence, everything will be disgusting. Ensure that it is heavy and that it can glide smoothly across the rails. Also, make sure that the locking mechanism is perfect and convenient.

dewalt dwe7491 youtube Amzon.com


The built-in stand sets this saw apart from competitors since it is actually quite stable out of the box and doesn’t require a custom stand or supports to combat vibration, which are often necessary with cheaper and lighter units. DeWalt sells a nearly identical saw with a less robust stand, and after viewing it in a big box store, I was glad to have this one.
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491rs dado Amzon.com


Robert Robillard is a remodeler, general contractor, and principal of a carpentry and renovation business located in Concord, Massachusetts, and serves as the Editor of Tool Box Buzz and founding editor of A Concord Carpenter . Rob is in charge of our Tool and Product Review - Tool and Product Review - Video Channel, , where we post all of our tool reviews and video tutorials. Rob enjoys using his knowledge and experience to help and educate building professionals as well as DIYers on best practices in the remodeling industry. The Concord Carpenter's motto: "Well done is better than well said!" : Read more about Rob

dewalt klyvsåg dwe7491 Amzon.com


Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.


This Ridgid table saw is a heavy-duty table saw that comes with its own stand with wheels. It has a strong 115-amp motor at 4000 rpm. It is an updated table saw with onboard storage for your tools like miter gauge, extra blades, rip fence and other saw accessories. This is a durable table saw for different projects and can even take 4 x 4 inches in just one pass. This has a front and back clamping fence to keep your material safe and sturdy as you work.
There are a lot of obvious reasons why the Skilsaw Portable Worm Drive Table Saw is top quality. Foremost, it is the first worm drive table, therefore, all other similar products are just based on this portable table saw. The Skilsaw is a brass-geared worm drive table saw that provides top power for maximum torque with its 5 HP dual-field motor for improved cutting speed. The selling point is its portability and compact design which makes it transportable anywhere. 

dewalt dwe7491 Amzon.com


Regular table saws usually have powerful motors that can give you of 3 to 5 HP at 240V. Powerful benchtop saws such as these can take larger materials like wooden flooring, logs, and lumber. On the other hand, smaller and more compact table saws have direct-drive motors that run on 120 V power at 2 HP. This kind of saw will work with thinner materials like wooden panels, vinyl, laminates and thin metal sheets.

dewalt dwe7491 cena Amzon.com


I have read dozens of reviews for Dewalt,Bosch,Baileigh,Grizzly and others and from my perspective (regarding Dewalt at least), Black&dDecker/Stanley have turned the product line , for the most part into junk. I have read reviews that indicate outright, that the table is not level, the fence is warped and if you want accurate cuts, then possibly you should look elsewhere.

dewalt dwe7491 nz Amzon.com


The legs fold easily with an intuitive mechanism that feels well thought out, and the safety attachments stow away within the unit, reducing its form factor and allowing it to be tucked away in a corner when not in use. However, the unit does weigh 90 pounds, so if you’re going to be loading it in and out of a truck bed several times a day or needing to haul it up and down the stairs where the wheels can’t help you, you may want to look at a lighter job site saw that dispenses with the stand.

dewalt dwe7491 review Amzon.com


I tested both saws and found their performance similar, though thanks to the rolling stand, I was more likely to reach for the DeWalt. If you don’t value the stand, the SKILSAW packs a lot of power in a small form and is the preferred job site saw of several local contractors I know. If you’re a weekend warrior like me, you may value the stand enough to spend the extra money on the DeWalt.
With a maximum cut depth of 3.125 inches and a 32.5-inch rip capacity, the 10-inch blade of this DeWalt table saw handled all the relatively light-duty board ripping I needed from it, but I also tested it against a variety of plywood and other board sizes to assess its capability. The 15-amp motor is fairly standard for this contractor or job site level of table saw, and none of the boards I threw at it caused it to bind—good news, as binding is at best annoying and at worst dangerous.

dewalt dwe7491 opinie Amzon.com


Blades come in various types and sizes. There are rip blades for cutting along the wood grains, hollow ground blades ideal for various materials, crosscut blades suitable for smooth and precise cuts, and combination blades for that double up as blades for crosscutting and ripping. Depending on what you do the most, it’s necessary to choose the right blade type and size that will get the job done with the most ease.

dewalt dwe7491x Amzon.com


The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

dewalt dwe7491rs vs bosch 4100-10 Amzon.com


Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.

table saw featherboard Amazon.com

×