Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.

laguna f2 table saw Amazon.com


A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades.

The built-in rack and pinion fence system, which acts as a guide for boards that runs parallel to the blade, adjusts by hand and is both easy to use and very accurate. I learned to trust the fence and its measurements once I got the saw set up, and it made my workflow faster knowing I didn’t have to measure everything four times to double-check the DeWalt.
Let me start by saying thank you for all of the in depth reviews you provide all of us. I find them extremely useful when making new purchases. Regarding the power adapter issue with the 60v table saw, I own the Dewalt DCV581H 18v/20V MAX Cordless/Corded Wet-Dry Vacuum and it does not require a special adapter that costs over $100, like the FlexVolt Miter Saws. Seems like the 60v tablesaw or the 120v miter saw could simply come with a cord, just like the vacuum.

dewalt table saw Amazon.com


A table saw is only as good as its blades. There are a variety of saw blades with varying diameter, arbor size, number of teeth, kerf size, speed, application, and material. Most common table saws use 10 or 12” saw blades with an average number of teeth at24 to 80. And when it comes to the material used, carbide and carbon steel are the most common however you will also find very strong diamond blades. 

industrial table saw Amazon.com


Smaller, portable table saw models have direct-drive motors that can operate on 120 V power to produce 2 HP. This is enough motor power to take on thinner materials. Table saws with more powerful motors are usually stationary saws that produce between 3 to 5 HP. Table saws with stronger motors rely on a belt drive to transfer the power from the motor to the blade and these operate on 240 V.
I’ve had this table saw about a year and have had very good results making precision cuts with the rip fence. Ease of use has been great. Get it out set up and get to making cuts fast. I am not making a daily living with it so I may not notice some short comings that daily users would. Maybe like with hand tools, someone won’t notice the difference between Snap-on or Craftsman wrenches until you make a living with them.
Got mine yesterday. Set it up. Cuts very fast. My concern is when I put a straight edge against the fence vertically, it only touches the fence at the top and bottom. There’s about a 0.025″ gap in the middle. Is this a concern for accuracy? I guess I could add a thin piece of hardwood to the face of the fence to make it more flat and perpendicular. I also don’t find an adjustment for the perpendicularity of the fence face to the table. Any thoughts?
The DEWALT DWE7491RS is a very good job site table saw. I’d even go so far as to say I think it’s the best overall job site + mobile stand option out there. This is a pretty bold statement considering I’ve been a huge fan of the Bosch saws for years. My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution.

dewalt dwe7491rs vs bosch 4100-10 Amzon.com


A solid, safe table saw is the cornerstone to any efficient job-site or worksite. Dewalt wants to close the gap on a cordless job site by introducing several cordless tools including a brand new table saw. We tested the Dewalt Flexvolt   8-1/4” table saw on our job site and in our shop and were impressed with its portability, versatility, performance and power.

dewalt dwe7491 accessories Amzon.com


This stand is one of the easier stands to set up that I’ve used. To fold the stand up you simply stand the saw up on it’s end. Then the 4 legs fold down by releasing easy to use levers. It takes less than a minute to set the saw up and there are no tools required. The large wheels and comfortable height handle make rolling the saw and stand super easy.

bench saw for sale Amazon.com


Further testing showed that the red “Stop” lever was the cause, not the power switch.  After turning on the saw, the red stop lever would drop too hard onto the stop button and turn the saw off.   After conferring with the product manager at Dewalt, it was determined that the red stop lever spring force was too high.  The units we tested was from a “manufacturing sample lot.”  MSL’s are the first time the plant does a big run of the product and Dewalt then has time to refine and make adjustments, before the tool goes to production.

laguna f2 table saw Amazon.com

×